Harlequin Toque

Something a touch different.

MATERIALS

• Worsted Weight yarn in 2 colors (CA and CB)
• Crochet Hook: I (5.5 mm)
• Darning needle

BODY

1. With CA, Chain 20.
2. With CA, work 5 rows of basic Tunisian stitch.
3. Attach CB and work 5 rows basic Tunisian stitch.
4. Repeat the alternating 5-row pattern until desired length is reached, ending on CB. (Mine was 60 rows)
5. Slip stitch across last row, to finish body.  Set aside

RIBBED BAND

1. With CA, chain 11.
2. Skip 1 ch.  Work sc in BLO across. Ch 1. Turn.
3. Repeat row 1 five more times (total 6 rows, total).
4. Attach CB.
5. Work 10 sc across as before, for 6 rows. 
6. Alternate colors CA and CB every 6 rows until there are the same number of colored sections as the body. 
7. Tie off.

ASSEMBLY

1. Align the band along the long edge of the hat body so that Body CA is lined up with the Band CB. 
2. With right sides together, attach the band to the body using sc, keeping the color patches aligned.
3. Tie off.
4. Fold hat in half, matching the short sides.  It should be worked so that you are joining a CA side to a CB side. 
5. With right sides together, sc the sides together. 
6. Tie off.
7. For the top of the hat, using a darning needle and doubled thread, weave the thread around the top stitches of the hat (opposite of the ribbed band) all the way around.  Pull the doubled yarn tightly so that the hat gathers completely closed. 
8. Tie off well, with hard knots. 
9. Pull all loose ends to the inside of the hat.  Weave in loose ends.

This pattern is the property of the designer. It is available for use, free of charge, for personal use only. No copies of this pattern or images may be sold or reproduced for profit, without the express permission of the author.

Granny's Vibe (blanket)

MATERIALS:

Worsted-weight or DK-weight yarn (6 oz skeins) -

• 12 oz Black,
• 6 oz each of at least 6 different saturated colors.

Crochet Hook Size G for DK
Crochet Hook Size I for Worsted

Color Sequence: 2 rows color, 1 row black.

Finished size:  Approximately 42" X 60"

BLANKET:

With Black, loosely ch 244 for DK or 188 for Worsted.

Row 1: 3 dc in 7th ch from hook, (sk 2 sts, 3 dc in next st) twice, *sk 5 sts, (3 dc in next st, sk 2 sts) twice, (3 dc, ch 3, 3 dc) in next st for point, (sk 2 sts, 3 dc in next st) twice: repeat from * across, end (3 dc, ch 3, 3 dc) in last st. Change color, ch 5, turn.

Row 2: 3 dc in 1st ch 3 sp, (3 dc bet next two 3 dc groups) twice, *sk sp bet next 2 groups, (3 dc bet next 2 groups) twice, (3 dc, ch 3, 3 dc) in ch 3 sp, (3 dc bet next 2 groups) twice; rep from * across, end (3 dc, ch 3, 3 dc) in last ch 5 sp, ch , turn.

Repeat Row 2 for Pattern Stitch throughout, working 2 rows of each color and one row Black, to desired length, with full color sequences, ending in black. Tie off.

Edging: Row 1: With Black, work 1 row sc, evenly spaced around entire outside edge, join with sl st in 1st sc. Tie off.

NOTE:  I added an extra row of black to each end, just because I thought it looked nicer.


This pattern is the property of the designer. It is available for use, free of charge, for personal use only. No copies of this pattern or images may be sold or reproduced for profit, without the express permission of the author.

Bedspread: Stained Glass Window #1

I've been playing with color designs and have come up with this one. It uses simple granny squares, assembled according to a chart to create a stained glass window throw. It is large.

This is a large project and requires around 1 skein of each color used, except black, which will take about 2 skeins.

GRANNY SQUARES

Finished square measures approximately 2”, using worsted weight yarn and a G (4.0 mm) hook.

Round 1: Ch 4. 11 Dc in 4th ch from hook (the first ch). There are now 12 dc in first ch (ch 3 counts as one dc). Sl st in top of first ch. 3 to join.

Round 2: Sl st in next st. Ch 3 in next space between dc posts. 2 dc in same space. *Skip 3 dc, 3 dc, ch 1 3 dc between dc posts.* Repeat between *twice more. 2 dc in same space as beginning ch 3. Sl st in top of first ch. 3 to join.

Finish off, weave in loose ends.

ASSEMBLY

Complete the squares in the desired colors and assemble according to the diagram, either by crocheting along edges or using a darning needle and mattress stitch.

After assembling the squares, use black and sc around the entire piece to finish.

Finished dimensions: Approximately 62" X 74"

This pattern is the property of the designer. It is available for use, free of charge, for personal use only. No copies of this pattern or images may be sold or reproduced for profit, without the express permission of the author.

Peanut Butter Cup Mittens

I created these mittens as an improvisation for the 11 Mittens in 2011 Challenge in the I Make Mittens group, on Ravelry. I really like how they turned out, so I'm recording the pattern.

PEANUT BUTTER CUP MITTENS

















MATERIALS
75 Yards each, Color A (CA) and Color B (CB)
Crochet Hook, H (5.00 mm)

HAND

With CA, chain 45. Join to form ring.
Round 1: sc in 2nd ch from hook. sc in next 2 ch. *3 sc in next sc, 1 sc in next 3 ch, sk 2 ch,* repeat between * around and join to first sc with sl st. 5 points created.
Join CB (carry CA inside mitten to be joined at next row).
Round 2: Sk joining stitch. *1 sc in next 3 ch, sk 2 ch, 3 sc in next sc*, repeat between * around and join to first sc with sl st.
Round 3: Pick up CB and continue pattern.
Rounds 4-9: Continue alternating colors each row, in pat.
Rounds 10-14: Continue in pat but DO NOT JOIN at end of round. At the end of the round, join the new color, ch.1 turn and work back in rows, in pat. This creates the opening for the thumb.
Rounds 15-29: Join row 15 with sl st. as at beginning. Continue alternating colors each row, in pat, as in rounds 4-9.
Rounds 30-31: Work dec. sc all around (2 sc tog). This creates a slight curve to the end of the mitten.

THUMB

With CA, ch 14. Join to form a ring. Place marker in the joining sl st.
Work sc around for 10 rounds. Cut about a 3" tail on yarn and knot to prevent raveling. Work the tail around the end and pull like a drawstring to close the end of the thumb. Tie off and work in the end. Turn right side out.

Turn mitten body inside out and place thumb inside at the thumb hole, so that right sides of the thumb are touching the right sides of the glove. Using whip or mattress stitching, attach thumb to mitten body. Tie off and work in loose end.

Turn Mitten right-side out.

FINISHING

With same color as end of mitten (CA), sl st or sew end closed. Tie off, work in loose end.

With CA, attach to BOTTOM of mitten and work in pat around to create smoother edge. Tie off and work in loose end.

This pattern is the property of the writer, TheHaunt, and may only be used for personal projects. It may not be sold or otherwise used for profit without the express and written permission of the author.